Photo Source: camperadvise.com
An RV requires a plug to connect to an external power source, and most RVs have a 50-amp plug. Wiring a 50-amp RV plug is not as difficult as it may seem. With the right tools and a little bit of know-how, you can easily wire a 50-amp RV plug in no time at all. In this guide, we’ll show you how to wire a 50-amp RV plug in just a few simple steps. Also, we’ll go over some important safety tips to make sure that you stay safe while wiring your RV plug.
What You’ll Need
Photo Source: greatwestvans.com
These are the things that you’ll need in order to wire your 50-amp RV plug:
- 50-amp RV plug – This is for the main power connection.
- RV power cord – This will connect your RV to the external power source.
- Wire stripper/cutter – This is for stripping the insulation off of the wires.
- Screwdriver – This is for tightening or loosening screws.
- Wire connections – These will connect the wires to the RV plug.
- Electrical Tape – This is for sealing up any exposed wire connections.
Steps In Wiring A 50 Amp RV Plug
Photo Source: camperrules.com
These are the steps you’ll need to take in order to wire a 50-amp RV plug:
Step 1: Cut the Power
The first step is to cut off the power to your RV. You can do this by disconnecting the battery or flipping the main breaker switch. This will ensure that there is no power running through the RV while you are working on it.
Step 2: Strip the Wires
Next, you’ll need to strip the insulation off of the wires. You’ll need to strip about 3/4 of an inch off of each wire. Be careful not to cut into the wire itself.
Step 3: Connect the Wires
Now, you’ll need to connect the wires to the RV plug. The order doesn’t matter, but you’ll need to make sure that the correct wire is connected to the correct terminal.
- The black wire (hot) goes on the brass terminal.
- The white wire (neutral) goes on the silver terminal.
- The green wire (ground) goes on the green terminal.
Step 4: Tighten the Connections
Once the wires are connected, you’ll need to tighten the screws to secure the connection. Be sure not to over-tighten the screws, as this could damage the RV plug.
Step 5: Tape up the Wires
You’ll need to tape up any exposed wire connections with electrical tape. This will help to prevent any shorts or sparks. Also, be sure to tuck the wires away so that they are not touching any metal surfaces.
Step 6: Restore Power
Finally, you can restore power to your RV by reconnecting the battery or flipping the main breaker switch. Once the power is back on, you should test the RV plug to make sure that it is working correctly.
Safety Tips When Wiring A 50 Amp RV Plug
Photo Source: gatawaycouple.com
When wiring a 50-amp RV plug, there are a few safety tips that you should keep in mind:
- Wear protective gear. When working with electricity, it’s always a good idea to wear protective gear. This includes gloves, safety glasses, and long pants. It is important to stay safe while you are working on your RV.
- Never work alone. It’s always a good idea to have someone else around when you are working with electricity. This way, if something goes wrong, there is someone there to help you.
- Turn off the power. Before you do any work on your RV, be sure to turn off the power. This will ensure that you don’t get electrocuted while you are working.
- Follow the instructions. Be sure to follow the instructions carefully. Also, if you are unsure about anything, it’s always a good idea to consult with a professional.
- Take your time. Don’t rush the job. Rushing can lead to mistakes, and mistakes can be dangerous. So be sure to take your time and do the job right.
- Test the RV plug. After you’ve finished wiring the RV plug, be sure to test it to make sure that it is working correctly. To test it, plug it into an external power source and turn on a few lights or appliances. If everything works, then you’ve done the job correctly.
By following these tips, you can wire a 50-amp RV plug safely and correctly. But if you’re not comfortable working with electricity, then we recommend that you have a professional electrician do the work for you. However, if you’re feeling confident and want to save some money, then wiring your own 50-amp RV plug can be a fun and rewarding experience.
Conclusion
Now that you know how to wire a 50-amp RV plug, you can get out there and start enjoying the great outdoors! Just remember to take your time, follow the instructions carefully, and always turn off the power before you start working. And if you’re not comfortable working with electricity, then we recommend that you have a professional electrician do the job for you.

My name is Ryan Wicks and I am the founder of rvneedthis.com, a blog dedicated to RV living. I have been an avid RVer for over 10 years, travelling across the US and Canada to explore scenic routes and beautiful national parks. Through RVblog.com, I share my knowledge and experiences to help others learn more about RVing and become better equipped to enjoy it too. I hope to make RVing more accessible and enjoyable for everyone interested in it. I look forward to continuing my journey with others!